Pcie-6002 Card Removal - SMART PCIE-6002 Installation And Use Manual

4. Insert the PCIE-6002 card into the PCIe slot, secure it, and ensure that the card is
properly fitted in the PCIe slot.
5. Close the system cover and then power on the system.
Make sure that the card has enough air flow after closing the system with the cover.
Refer to the MaxCore MC3000 Platform Installation and Use manual for setting the
fan speed accordingly.
The CPU transcoding performance is directly related to the airflow and cooling
ability of the server in which the card is installed.
2.7.2

PCIE-6002 Card Removal

To remove the PCIE-6002 card, perform the following steps:
1. Make sure you are in an ESD-safe environment.
2. Power off the system, disconnect the system from the electrical outlet and peripherals
and remove any cables connected to the card.
3. Remove the system cover.
Wait at least 30 minutes for the card to cool down as the heat sink could be
extremely hot.
4. Remove the screw holding the front panel bracket and gently pull the PCIE-6002 card
from the slot
Place the PCIE-6002 card into an ESD-protective bag and seal it appropriately.
5. Close the cover of the system.
PCIE-6002 Installation and Use (6806800U70B)
Hardware Preparation and Installation
NOTICE
NOTICE
35