Table of Contents
Advertisement
6.6
Initial Setting Menu
The [Initial Setting] menu sets up language, remote controller, menu transparency,
and 12 sub menus, which contain settings for various marks.
Note: Operation on the [Initial Setting] menu is stopped whenever the transducer con-
trol keys are operated. Re-set this menu after concluding transducer operations.
1. Press the MENU/ESC key to show the main menu.
2. Select [Others] then push the left button.
3. Select [Initial Setting] then push the left button.
4. Select [Changeable] then push the left button.
For [Target Lock] and [Test], see page 2-17 and page 8-11, respectively.
[Remote BOX LED]: Turns ON/OFF the LED of the remote controller (option).
[Menu Box Transp.]: Selects the degree of transparency for the menu display. The
settings are [OFF], 1 to 5, and [Stage. Transp.]. [Stage Transp.] shows the menu layer
below the top menu layer in semi-transparent state. All other menus are shown trans-
parent. Alpha blending technology is used for transparency effects.
Initial Setting
Language
: English
Remote BOX LED
: ON
Menu Box Transp.
: OFF
TVG Monitor Transp. : OFF
Monitor Setting ...
Data Display ...
Mark Display ..
Mark Size ...
Data Display ...
Current Vec & Wind ...
Net SONDE Setting ...
Net Shoot Setting ...
Target Lock ...
Stabilization ...
Reg TD Pos.: Execute
Test ...
Initialization ...
Quit
For serviceman
For serviceman
6. OTHERS MENU
6-7
Advertisement
Table of Contents
Troubleshooting
