Table of Contents
Advertisement
2.2.2
Horizontal2 mode
The H2 mode shows one of three kinds of horizontal display combinations: Land-
scape, Portrait or Inset as shown on page 1-12. Follow the procedure shown below to
select a combination display. The zoom-out display (shown on the inset mode) can be
moved by drag and drop operation and its size changed from the menu. To show the
horizontal2 mode display, press the MODE key and select [H2].
1. Press the MENU/ESC key to show the main menu.
2. Click [Others].
3. Click [Display Setting].
4. Click [H2 Display].
5. Click the desired option.
6. Click [Quit] on the setting box to close the box.
7. Long-push the MENU/ESC key to close all menus.
Note: Range, tilt angle, gain and program keys can be adjusted separately for each
horizontal display.
Display Setting
Mode Selection
Echo Display Area
H2 Display
2nd Monitor Setting
V-Scan Aspect Ratio
V-Scan Dpt Rng
Presentation Mode
TM Disp Range
Full Screen Area
Tilt Lever
Gain Knob Setting
F10
Gain Knob Step
Auto Tilt
Net Course Mark
F9
Dimmer
Key Beep Volume
Timer Display
Quit
Cancel
Landscape
Portrait
Inset
Quit
: Mode Key
: Within Range
: Landscape
: Portrait
: Fixed
: 100
: Head Up
: 1.6R
: 1.6R
: Tilt
: Execute
: 0.5
: Narrow
: Execute
: 7
: 5
: OFF
2. HORIZONTAL MODE
2-3
Advertisement
Table of Contents
Troubleshooting
