Siqura BL2002M1-EI Quick Start Manual

BL2002M1-EI
2MP Network Bullet Camera
Quick Start Guide

Unpack

Mounting Adapter
Pin Pusher
Camera Unit
BNC Connector
Security Torx
Note 1: Subject to modification. Actual product and accessories may differ in appearance.

Connector Definition

No. Connector
1 Alarm I/O Alarm I/O connection
2 Audio Audio Line in/Out
RJ-45 Port
3 (Contact Siqura for a For network and PoE connections
compatible PoE injector.)
4 Power (DC12V) Power connection
Insert the SD card into the card slot to store
5 SD Card Slot videos and snapshots. Do not remove the SD card
when the camera is powered on.
Press the button with a proper tool for at least 20
6 Reset Button
seconds to restore the system.
Table 1 Connector definition
© Siqura B.V. 2019
Vision 2.0 (01112019)
BL2002M1-EI QSG
Find additional manuals, the datasheet,
the EU Declaration of Conformity, and
the latest firmware for this product at:
Pipe Cover
Screws(4x) &
Plastic Screw
Anchors (4x)
Quick Start Guide
Definition
Siqura.com/downloads/software

Installation Notices

CAUTION:
INSTALLATION SHALL BE PERFORMED BY QUALIFIED PERSONNEL ONLY.
INSTALLATION SHALL BE IN ACCCORDANCE WITH LOCAL PROCEDURES.
INSTALLATION WITH POE SHALL BE IN UNEXPOSED NETWORKS.
BATTERY REPLACEMENT SHALL NOT BE APPLIED IN VIEW OF THE RISK OF
EXPLOSION.
IF YOU USE AN EXTERNAL POWER SUPPLY, CONTACT SIQURA TO MAKE SURE
THAT THE POWER SUPPLY HAS THE PROPER POWER SPECIFICATIONS.
MAKE SURE THAT THE POWER SUPPLY COMPLIES WITH LPS REQUIREMENTS.
NOTE:
IT IS NOT RECOMMENDED TO CONTINUOUSLY (24/7) RECORD WITH THE MICRO
SD CARD, AS THE CAMERA MAY NOT SUPPORT LONG-TERM CONTINOUS DATA
READ/WRITE. CONTACT THE MANUFACTURER OF THE MICRO SD CARD FOR
INFORMATION REGARDING THE RELIABILITY AND THE LIFE EXPECTANCY.

Cabling through Junction Box

Connectors

6
5
3
1 2
4

Pan/Tilt/Rotate