Connecting The Modem With An Adapter - HP Compaq NC4000 Getting Started Manual

Hardware Setup

Connecting the Modem with an Adapter

To connect the modem to an analog telephone line that does
not have an RJ-11 telephone wall jack:
1. Turn the notebook display-side up on a flat surface near a
telephone wall jack.
2. If your modem cable has noise suppression circuitry 1,
which prevents interference with TV and radio reception,
place the circuitry end of the cable near the notebook.
3. Plug the modem cable into the RJ-11 (modem) jack on the
notebook 2.
4. Plug the other end of the modem cable into the
country-specific modem adapter 3.
5. Plug the country-specific modem adapter into the telephone
jack 4.
✎
Telephone wall jacks, modem adapters, and modem cables
vary in appearance by region and country.
1–8 Getting Started