Connecting The Modem To An Rj-11 Jack - HP Compaq NC4000 Getting Started Manual

Connecting the Modem to an RJ-11 Jack

To connect the modem to an analog telephone line that has an
RJ-11 telephone jack:
1. Turn the notebook display-side up on a flat surface near an
RJ-11 telephone wall jack.
2. If your modem cable has noise suppression circuitry 1,
which prevents interference with TV and radio reception,
place the circuitry end of the cable near the notebook.
3. Plug the modem cable into the RJ-11 (modem) jack on the
notebook 2.
4. Plug the other end of the modem cable into the RJ-11
telephone wall jack 3.
✎
Telephone wall jacks and modem cables vary in appearance by
region and country.
Getting Started
Hardware Setup
1–7