Connecting The Modem With An Adapter - HP Compaq NC6110 Getting Started Manual

Connecting the Modem with an Adapter

To connect the modem to an analog telephone line that does
not have an RJ-11 (modem) jack:
1. Turn the notebook display-side up on a flat surface near
a telephone jack.
2. If the modem cable contains noise suppression circuitry 1,
which prevents interference with TV and radio reception,
orient the circuitry end of the cable toward the notebook.
3. Plug the modem cable 2 into the RJ-11 (modem) jack on
the notebook.
4. Plug the modem cable 3 into the country-specific modem
adapter.
5. Plug the country-specific modem adapter 4 into the
telephone jack.
✎
Telephone wall jacks and modem cables vary in appearance by
region and country.
Getting Started
Hardware Setup
1–7