Optical Drive - HP Compaq 6730s Maintenance And Service Manual

Optical drive

NOTE: All optical drive spare part kits include an optical drive bezel.
Description
For use only with HP Compaq 6730s Notebook PC models
DVD±RW Double-Layer Drive with LightScribe
Blu-ray Disc ROM Drive with SuperMulti DVD±R/RW Double-Layer
DVD/CD-RW Combo Drive
DVD-ROM Drive
For use only with HP Compaq 6735s Notebook PC models
DVD±RW SuperMulti Double-Layer Drive with LightScribe
DVD/CD-RW Combo Drive
DVD–ROM Drive
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Remove the optical drive:
1. Position the computer with the right side toward you.
2. Remove the slotted Torx T8M2.5×7.0 screw (1) that secures the optical drive to the computer.
3. Insert a flat-bladed screwdriver or similar tool into the optical drive tab access (2) and press the
tab to the left to release the optical drive from the computer.
Battery on page 50).
Spare part number
491272-001
491273-001
491271-001
491270-001
491601-001
491600-001
491599-001
Component replacement procedures 59