Bluetooth Module - HP Compaq 6730s Maintenance And Service Manual

Bluetooth module

NOTE: The Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth
module cable is included in the Cable Kit, spare part number 457400-001. See
for more Cable Kit spare part number information.
Description
For use in all countries and regions except Japan and Asia Pacific countries and regions
For use only in Japan and Asia Pacific countries and regions
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Switch cover and keyboard (see
d. Speakers (see
e. Display assembly (see
f. Top cover (see
Remove the Bluetooth module:
1. Disconnect the Bluetooth module cable (1) from the system board.
2. Remove the Bluetooth module cable (2) from the routing path.
3. Remove the Phillips PM2.0×4.0 screw (3) that secures the Bluetooth module to the base enclosure.
78 Chapter 4 Removal and replacement procedures
Battery on page 50).
Hard drive on page 51)
Optical drive on page
Switch cover and keyboard on page
Speakers on page 66)
Display assembly on page
Top cover on page 74)
59)
67)
Cable Kit on page 29
Spare part number
398393-002
450066-001
61)