Memory Module - HP Compaq 6730s Maintenance And Service Manual

6. Remove the WLAN module (3) by pulling the module away from the slot at an angle.
NOTE:
Reverse this procedure to install the WLAN module.

Memory module

Description
For use only with HP Compaq 6730s Notebook PC models
2-GB (PC2-6400, 800-MHz, DDR2)
1-GB (PC2-6400,800-MHz, DDR2)
2-GB (PC2-5300, 667-MHz, DDR2)
1-GB (PC2-5300, 667-MHz, DDR2)
For use only with HP Compaq 6735s Notebook PC models
2048-MB (PC2-6400, 800-MHz, DDR2)
1024-MB (PC2-6400, 800-MHz, DDR2)
2048-MB (PC2-5300, 667-MHz, DDR2)
1024-MB (PC2-5300, 667-MHz, DDR2)
Before removing the memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
WLAN modules are designed with a notch (4) to prevent incorrect insertion.
Battery on page 50).
Component replacement procedures
Spare part number
491479-001
491477-001
491478-001
491476-001
491595-001
491594-001
491592-001
491591-001
57