HP Compaq 6730s Maintenance And Service Manual page 111

Select
Port Options (all are enabled by default)
AMT Options
Set Security Level
Restore Security Defaults
To do this
NOTE: All port options are enabled by default.
● Enable/disable the Smart Card slot.
●
Enable/disable the ExpressCard slot.
● Enable/disable the serial port.
●
Enable/disable the parallel port.
● Enable/disable the flash media reader.
●
Enable/disable the USB port.
CAUTION: Disabling the USB port also disables
MultiBay devices and ExpressCard devices on the
advanced port replicator.
●
Enable/disable the 1394 port.
NOTE: All AMT options are disabled by default.
●
Enable/disable Firmware Verbosity.
● Enable/disable AMT Setup Prompt (CTRL-P).
●
Enable/disable USB Key Provisioning Support.
● Enable/disable Unconfigure AMT on Next Boot.
●
Enable/disable Terminal Emulation Mode
● Enable/disable Firmware Progress Event Support.
●
Enable/disable include TYPE-131 in SMBIOS.
Change, view, or hide security levels for all BIOS menu items.
Restore the default security settings.
Computer Setup menus 103