Top Cover - HP Compaq 6530b Maintenance And Service Manual

Top cover

Description
Top cover
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Switch cover (see
e. Display assembly (see
Remove the top cover:
1. Turn the computer upside down, with the front toward you.
2. Remove the two rubber screw covers (1) and the seven Torx T8M2.5×9.0 screws (2) that secure
the top cover to the computer. The rubber screw covers are available in the Rubber Kit, spare part
number 486293-001.
Battery on page 46).
Hard drive on page 52)
Optical drive on page
Switch cover on page 65)
Switch cover on page
Display assembly on page
55)
65)
74)
Component replacement procedures
Spare part number
486283-001
81