Information codes
If the oven fails to operate, you may see an information code on the display. Check the table
below and try the suggestions.
Code
Door lock malfunctions
C-d1
C-20
Sensor malfunctions
C-21
C-22
Only occurs during EEPROM Read/
C-F1
Write
If there is no communication between
C-F0
the main PCB and sub PCB
Occurs when a communication
C-F2
problem is maintained between the
Touch IC <-> Main or Sub micom
Button problem
C-d0
Occurs when a button is pressed and
held for a period of time.
If the divider is removed during
cooking in Dual cook mode.
-dC-
If the divider is inserted during
cooking in Single cook mode.
Safety shutoff
Oven has continued operating at a set
temperature for an extended time.
S-01
•
Under 105 °C - 16 hours
•
From 105 °C to 240 °C - 8 hours
•
From 245 °C to Max - 4 hours
NV75J7570RS_EU_DG68-00615D-04_EN.indd 77
Meaning
Action
Turn off the oven and then restart. If the
problem continues, turn off all power for
30 seconds or more and then reconnect.
If the problem is not fixed, please contact
a service centre.
Turn off the oven and then restart. If the
problem continues, turn off all power for
30 seconds or more and then reconnect.
If the problem is not fixed, please contact
a service centre.
Clean the buttons and make sure there
is no water on/around them. Turn off
the oven and try again. If the problem
continues, contact a local Samsung
service centre.
The divider must not be removed during
cooking in Dual cook mode.
Turn off the oven and then restart. If the
problem continues, turn off all power for
30 seconds or more and then reconnect.
If the problem is not fixed, please contact
a service centre.
This is not system failure. Turn off the
oven and remove food. Thenm try again
normally.
English 77
2017-03-09
12:05:22