Fast Action Buttons - ADInstruments DS2002A Series User Manual

Dots
OFF
Persist 0.2S-8S selectable
Infinite
YT
Format
XY
Contrast
Dotted line
Grid
Real line
OFF
Grid Intensity

5.6 Fast Action Buttons

AUTOSET: Automatically set the oscilloscope controls to generate a usable display of the input
signals. Refer to the following table for relative content.
SINGLE SEQ: Acquire a single waveform and then stop the acquisition.
RUN/STOP: Continuously acquire waveforms or stop the acquisition.
HELP: Display the Help menu.
DEFAULT SETUP: Recall the factory setup. Refer to the following table for relative content.
Save to USB Disk: Save all displays on the screen to a USB device, just like the screen capturing
function of a computer.
5.6.1AUTOSET
Autoset is one of the advantages digital oscilloscopes have. When you push the AUTOSET button,
the oscilloscope will identify the type of waveform (sine or square wave) and adjust controls
according to input signals so that it can accurately display the waveform of the input signal.
DS2002A Series Digital Storage Oscilloscope User Manual
points in the display; Dots only displays the sample
points.
Sets the time length to display each displayed sample
point.
YT format shows the vertical voltage in relation to time
(horizontal scale); XY format displays a dot between
CH1 and CH2 each time when a sample is acquired,
where the voltage or current of CH1 determines the X
coordinate of the dot (horizontal) and the voltage or
current of CH2 determines the Y coordinate (vertical).
For detailed information, refer to descriptions on XY
format in the following text.
0-15 16 ranks adjustable, with a progress bar to
display; Press F5 to select this option. Turn the
multi-functional knob to adjust.
Next Page
Off only displays the horizontal and vertical coordinates
at the center graticule on the screen.
0-15 16 ranks adjustable, with a progress bar to
display.
Basic Operation
39