Table of Contents
Advertisement
5.5.5CURSOR
Push the CURSOR button to display the Cursor Menu.
Options
Settings
Off
Type
Voltage
Time
CH1
CH2
Source
MATH
REFA
REFB
S
Select Cursor
E
Display the
difference
Delta
(delta)
between the
cursors.
Moving Cursors: Press the key near Select Cursor to select a cursor and turn V0 to move it.
Cursors can be moved only when the Cursor Menu is displayed.
5.5.6DISPLAY
The waveform display is affected by settings of the oscilloscope. A waveform can be measured
once it is captured. The different styles to display a waveform on the screen give significant
information about it.
There are two modes to display waveforms Single-window and Dual-window. Refer to
Controls
for more information.
Push the DISPLAY button and the following menu appears.
Options
Settings
Type
Vectors
DS2002A Series Digital Storage Oscilloscope User Manual
Comments
Select a measurement cursor and display it.
Voltage measures amplitude while Time measures time and
frequency.
Select a waveform to take the cursor measurement.
Use the readouts to show the measurement.
S indicates Cursor 1. E indicates Cursor 2.
A selected cursor is highlighted, which can be moved freely. Both
cursors can be selected and moved at the same time. The box
behind the cursor displays the location of the cursor.
Display the measurement in the box under this option.
Comments
Vectors fills up the space between adjacent sample
Basic Operation
Horizontal
38
Advertisement
Table of Contents
