Advertisement
WORKING LOAD LIMIT 2000KG
• Safety Instructions
• Operation Procedures
• Maintenance Procedures
READ RULES FOR SAFE OPERATION AND INSTRUCTIONS CAREFULLY
WARNING:THEJACKMUSTBEUSEDONLYONHARD
LEVEL SURFACES AND BE FREE TO ROLL DURING
LIFTING AND LOWERING. DO NOT GET UNDER A
VEHICLE THAT IS SUPPORTED BY A TROLLEY JACK
- USE SUPPORT STANDS.
FLOOR JACK
OWNER'S MANUAL
THIS JACK CONFORMS TO MANDATORY
STANDARD AS 2615:2016
Shinn Fu (Australia) PTY. LTD.
15 Viewtech Place, Rowville, Victoria 3178, Australia
Model: F2000A
1
Advertisement
Table of Contents
Related Manuals for Pro-Lift F2000A
Summary of Contents for Pro-Lift F2000A
- Page 1 Model: F2000A FLOOR JACK OWNER’S MANUAL WORKING LOAD LIMIT 2000KG • Safety Instructions • Operation Procedures • Maintenance Procedures READ RULES FOR SAFE OPERATION AND INSTRUCTIONS CAREFULLY WARNING:THEJACKMUSTBEUSEDONLYONHARD LEVEL SURFACES AND BE FREE TO ROLL DURING LIFTING AND LOWERING. DO NOT GET UNDER A VEHICLE THAT IS SUPPORTED BY A TROLLEY JACK - USE SUPPORT STANDS.
- Page 2 SAFETY INSTRUCTIONS INSPECTIONS 1. BEFORE EACH USE Visual inspection should be made before each use of the trolley jack for abnormal conditions such as cracked welds, leaks and damaged, loose, or missing parts. 2. AFTER EACH USE Trolley jack should be inspected immediately if the lift is believed to have been subjected to an abnormal load or shock.
- Page 3 OPERATION PROCEDURES Before using Moving the jack 1. Remove cover plate (friction fi t, easily Place handle in Handle Sleeve. DO NOT removes) and open Oil Filler Plug to move the jack when handle is on the allow air to be vented. Release Valve as this may cause damage 2.
- Page 4 SPECIFICATIONS Working Load Limit: ................... 2000Kg Jack Dimension : ..............592mm x 187mm x 170mm Height Lowered : ....................145mm Height Raised : ....................435mm Oil Capacity : ......................160ml Net Weight : ...................16Kg. (approx.) 40mm 75.5mm 187mm 592mm MAINTENANCE PROCEDURES MAINTAINING OIL LEVEL Important Note: Important Note: 12mm below valve hole.
- Page 5 LUBRICATION KNOW YOUR JACK • Add lubrication oil to all moving parts Compare these illustrations with your every 3 months. jack before operation and/or oil level maintenance to become familiar with PREVENTING RUST the location of jack components. • Check Piston Rod & Pump Piston every 3 months for any signs of rust or OIL FILLER corrosion.
Need help?
Do you have a question about the F2000A and is the answer not in the manual?
Questions and answers