If Rice Does Not Cook Properly - Tiger JBX-A Operating Instructions Manual

Rice cooker / warmer

Hide thumbs Also See for JBX-A:

Operating instructions manual (48 pages)

Operating instructions manual (109 pages)

Table of Contents

Cleaning and Maintenance

Cleaning the heater plate

Water drops may fall from the lid during cooking and cause the surface of the heater plate to become dirty.

This does not affect the performance of the rice cooker, however, you can clean the heater plate according to

the following procedure if necessary.

(1) Add a small amount of

commercially available cream

cleaner to a nylon scrubbing

sponge and remove the stains

from the heater plate.

(2) Wipe the heater plate clean

using a damp paper towel or

cloth.

Removing odors

The following procedure should be performed each time after cooking, or if odors become an issue.

Note

● Be careful with the rice cooker, inner pot, cooking plate, and healthy cooking plate during cleaning as they

are hot. Otherwise, burns may be caused by hot surfaces.

„ Rice cooker

Do not place the cooking plate inside the inner pot.

(1) Fill the inner pot up to about 80% with

water, select the "Plain" menu, and

press the [Start] key.

(2) Press the [Keep Warm/Cancel] key when

the Keep Warm lamp lights up.

Note

● If odors become an issue, use citric acid (approx.

20 g) added to the water for more effective

deodorizing.

It may be impossible to remove some odors

completely. In this case, contact the place of

purchase.

Nylon scrubbing

sponge

Heater plate

(3) Clean the inner pot, inner lid, and steam

cap using a mild dishwashing detergent,

and then rinse them sufficiently with

water.

(4) Allow the rice cooker and all parts to dry

in a well-ventilated location.

„ Cooking plate and healthy

cooking plate

Immerse the cooking plate and the healthy cooking

plate in hot water and soak them for approximately

1 hour.