System Event - Direct IP Idis DC-T4217WRX Operation Manual

Part 1 - Remote Setup

System Event

Select System Event and configure system event
settings. With system event enabled, system status will
be checked periodically and corresponding alerts will be
generated.
• System Alive: Select to check the system status and
then set up a schedule.
- Send Email: Select to send out an email when the
system comes on line.
- Remote Callback: Select this option to send a
message to a remote system when the system
comes on line and then select which system to send
the message to.
• Email and Remote Callback settings under Event
Action must be configured correctly in order to
send out emails and messages.
• Remote Callback is not supported on IDIS Web.
• The camera must be registered to the remote
system in order to use the Remote Callback feature.
30