Setting The Encrypted Reception - Kyocera Triumph-Adler P-C2155w Operation Manual

Using Convenient Fax Functions > Encryption
6
7
8

Setting the Encrypted Reception

To conduct encryption communication operating the receiving system, follow the steps below.
1
2
3
4
Select whether or not to use an encryption box.
To use an encryption box
Select [On] > [OK] key. Select an encryption box using the procedure below.
To not use an encryption box
Select [Off] > [OK] key. Proceed to step 7.
Select the encryption box.
If you need to select an encryption box, set the box.
1
Enter the box number (0000 to 9999) with the numeric keys.
2
Select the [OK] key.
Finish the encrypted transmission settings.
Select the [OK] key.
Send Start.
Press the [Start] key.
The transmission will start.
NOTE
When [On] is selected in [Check beforeSend], a destination confirmation screen is
displayed when you press the [Start] key.
Confirmation Screen of Destinations (page 7-11)
Register the encryption key ahead of time.
Register the encryption key that you decided upon with the sender.
For the procedure for registering an encryption key, refer to the following:
Registering an Encryption Key (page 5-24)
Display the screen.
[System Menu/Counter] key > [▲] [▼] key > [FAX] > [OK] key > [▲] [▼] key > [Reception] >
[OK] key > [▲] [▼] key > [Encryption RX] > [OK] key
Turn on encrypted reception.
1
[On] > [OK] key
2
Select the encryption key number that you used to register the encryption key that you
decided upon with the sender.
3
Select the [OK] key.
The machine receives the encrypted originals from the sender of the specified encryption
key.
5-26