Table of Contents
Advertisement
Installation
Door Removal
1
Open door completely.
Fold latches backward until locked in place.
Leg Installation
1
Legs are packed in styrofoam top pack.
Note: Legs should be installed near to where
appliance is to be used, as they are not
secure for long transit.
4
Lower range gently to keep any undue strain
from legs and internal mounting hardware.
2
Close door until latches stop door
2
1
1
2
2
Note: It is strongly recommended
that a pallet or lift jack be used rather than tilting.
Raise unit about a foot. Unscrew temporary legs
from couplings.
10
3
Lift door up and out
3
3
Screw legs into couplings on all
four corners.
Advertisement
Table of Contents
