Polar Electro CK640 Quick Start Manual

Timed Positive Blast Chilling Timed Positive Blast Chilling a a a a nd Storage Cycle Timed Positive Blast Chilling Timed Positive Blast Chilling
To Set and Start Cycle: To Set and Start Cycle: To Set and Start Cycle: To Set and Start Cycle:
Make sure unit is in "standby" mode.
•
please press the set button
Once in "Standby" mode, press
•
Press the down button
•
To adjust the time, press
•
Press the
•
Press the start/stop button
•
start flashing once set button is pressed.
Please be aware, Please be aware, Please be aware, Please be aware,
1. 1. 1. 1. if previous cycle was a negative, a positive cycle will not run until unit is back up to temperature. if previous cycle was a negative, a positive cycle will not run until unit is back up to temperature. if previous cycle was a negative, a positive cycle will not run until unit is back up to temperature. if previous cycle was a negative, a positive cycle will not run until unit is back up to temperature. if previous cycle was a negative, a positive cycle will not run until unit is back up to temperature. if previous cycle was a negative, a positive cycle will not run until unit is back up to temperature. if previous cycle was a negative, a positive cycle will not run until unit is back up to temperature. if previous cycle was a negative, a positive cycle will not run until unit is back up to temperature. if previous cycle was a negative, a positive cycle will not run until unit is back up to temperature. if previous cycle was a negative, a positive cycle will not run until unit is back up to temperature. if previous cycle was a negative, a positive cycle will not run until unit is back up to temperature. if previous cycle was a negative, a positive cycle will not run until unit is back up to temperature.
2. 2. 2. 2. The settings are temporary: when a new cycle is activated (and after The settings are temporary: when a new cycle is activated (and after The settings are temporary: when a new cycle is activated (and after The settings are temporary: when a new cycle is activated (and after The settings are temporary: when a new cycle is activated (and after The settings are temporary: when a new cycle is activated (and after The settings are temporary: when a new cycle is activated (and after a power failure), the de The settings are temporary: when a new cycle is activated (and after
the r3/r4, r5/r6, r7/r8 and r9/rA values. the r3/r4, r5/r6, r7/r8 and r9/rA values. the r3/r4, r5/r6, r7/r8 and r9/rA values. the r3/r4, r5/r6, r7/r8 and r9/rA values.
the r3/r4, r5/r6, r7/r8 and r9/rA values. the r3/r4, r5/r6, r7/r8 and r9/rA values. the r3/r4, r5/r6, r7/r8 and r9/rA values. the r3/r4, r5/r6, r7/r8 and r9/rA values.
Timed Negative Chilling And Storage Cycle To Set and Start Cycle: Timed Negative Chilling And Storage Cycle To Set and Start Cycle: Timed Negative Chilling And Storage Cycle To Set and Start Cycle: Timed Negative Chilling And Storage Cycle To Set and Start Cycle: Timed Negative Chilling And Storage Cycle To Set and Start Cycle: Timed Negative Chilling And Storage Cycle To Set and Start Cycle: Timed Negative Chilling And Storage Cycle To Set and Start Cycle: Timed Negative Chilling And Storage Cycle To Set and Start Cycle:
To Set and Start Cycle: To Set and Start Cycle:
To Set and Start Cycle: To Set and Start Cycle:
Make sure unit is in "standby" mode. The temperature of unit will flash in standby mode. If still in cycle mode, Make sure unit is in "standby" mode. The temperature of unit will flash in standby mode. If still in cycle mode, Make sure unit is in "standby" mode. The temperature of unit will flash in standby mode. If still in cycle mode,
•
please press the set button
Once in "Standby" mode, press
•
Press the down button
•
To adjust the time, press
•
Press the or take no action for 15 s ,to save the new parameter . or take no action for 15 s ,to save the new parameter .
•
Press the start/stop button
•
start flashing once set button is pressed. Timer start flashing once set button is pressed. Timer
Please be aware, Please be aware, Please be aware, Please be aware, The settings are temporary: when a new cycle is activated (and after a power failure), the de The settings are temporary: when a new cycle is activated (and after a power failure), the de The settings are temporary: when a new cycle is activated (and after a power failure), the de- - - - vice will The settings are temporary: when a new cycle is activated (and after a power failure), the de The settings are temporary: when a new cycle is activated (and after a power failure), the de The settings are temporary: when a new cycle is activated (and after a power failure), the de The settings are temporary: when a new cycle is activated (and after a power failure), the de The settings are temporary: when a new cycle is activated (and after a power failure), the de The settings are temporary: when a new cycle is activated (and after a power failure), the de The settings are temporary: when a new cycle is activated (and after a power failure), the de The settings are temporary: when a new cycle is activated (and after a power failure), the de The settings are temporary: when a new cycle is activated (and after a power failure), the de
restore the r3/r4, r5/r6, r7/r8 and r9/rA values. restore the r3/r4, r5/r6, r7/r8 and r9/rA values. restore the r3/r4, r5/r6, r7/r8 and r9/rA values. restore the r3/r4, r5/r6, r7/r8 and r9/rA values. restore the r3/r4, r5/r6, r7/r8 and r9/rA values. restore the r3/r4, r5/r6, r7/r8 and r9/rA values. restore the r3/r4, r5/r6, r7/r8 and r9/rA values. restore the r3/r4, r5/r6, r7/r8 and r9/rA values.
CK640 Blast CK640 CK640 CK640 Blast Blast Blast Blast Blast Chiller Blast Blast Chiller Chiller Chiller / / / / Freezer:
nd Storage Cycle nd Storage Cycle nd Storage Cycle nd Storage Cycle nd Storage Cycle nd Storage Cycle nd Storage Cycle
The temperature of unit will flash in standby mode.
for 2 seconds to clear.
with in 15s with in 15s to show the pre-set time.
,then press ,then press
or take no action for 15 s ,to save the new parameter . or take no action for 15 s
to start the cycle. The cycle will take 2 minutes to
pressed. Timer
for 2 seconds to clear. for 2 seconds to clear.
to select "nEG
with in 15s to show the pre with in 15s to show the pre-set time.
,then press ,then press
to start the cycle. The cycle will take 2 minutes to start. Timer
Freezer: Freezer: Quick Freezer: Quick Quick Quick Start
to select "PoS PoS" and ensure the timer
PoS PoS
to reduce or
LED will then remain on.
nEG nEG" and ensure the timer nEG
to reduce or
e. The cycle will take 2 minutes to start. Timer
LED will then remain on.
Start Start Guide Start Guide Guide Guide Guide Guide Guide Guide
mode. If still in cycle mode,
LED is flashing. LED is flashing.
to increase increase the value.
to start. Timer
a power failure), the de a power failure), the de a power failure), the de a power failure), the de a power failure), the de a power failure), the de- - - - vice will restore a power failure), the de
LED is flashing. LED is flashing.
to increase the value. to increase the value.
LED will
vice will restore vice will restore vice will restore
LED will
vice will vice will vice will