Table of Contents
Advertisement
Installation
Figure 19. Interconnection field wiring remote condenser
NOTES:
1. DASHED WIRES (
) NOT APPLICABLE FOR SINGLE-STAGE UNITS
2. PHANTOM WIRES (
) NOT APPLICABLE FOR SINGLE PHASE POWER SUPPLIES
3. OPTIONAL REMOTE MOUNTED DEVICE WIRES DIRECTLY TO A/C UNIT TERMINAL BLOCK
4. CONDUCTOR COUNTS IN FIGURE ARE NOTIONAL. SEE UNIT ELECTRICAL DRAWING FOR
ACTUAL NUMBER AND TERMINAL POINTS OF CONDUCTORS
Figure 20. Interconnection field wiring remote condensing unit
NOTES:
1. DASHED WIRES (
2. PHANTOM WIRES (
3. OPTIONAL REMOTE MOUNTED DEVICE WIRES DIRECTLY TO A/C UNIT TERMINAL BLOCK
4. CONDUCTOR COUNTS IN FIGURE ARE NOTIONAL. SEE UNIT ELECTRICAL DRAWING FOR
ACTUAL NUMBER AND TERMINAL POINTS OF CONDUCTORS
24
CONTROL CONFIGURATION (OPTIONAL)
E²
6 CNDCT. PHONE TYPE
3 CONDUCTOR
NON-SHIELDED CABLE
SHIELDED CABLE
SEE NOTE 3
REMOTE TEMPERATURE/
E²
CONTROLLER DISPLAY
E² DISPLAY PLUGS DIRECTLY INTO THE
CONTROLLER INSIDE THE ELECTRIC BOX
CONFIGURATION (OPTIONAL)
CONTROL CONFIGURATION (OPTIONAL)
E²
6 CNDCT. PHONE TYPE
3 CONDUCTOR
NON-SHIELDED CABLE
SHIELDED CABLE
SEE NOTE 3
E²
CONTROLLER DISPLAY
E² DISPLAY PLUGS DIRECTLY INTO THE
CONTROLLER INSIDE THE ELECTRIC BOX
CONFIGURATION (W/ OPTIONS)
) NOT APPLICABLE FOR SINGLE-STAGE UNITS
) NOT APPLICABLE FOR SINGLE PHASE POWER SUPPLIES
HUMIDITY SENSOR
(OPTIONAL)
CONTROL
THERMOSTAT
REMOTE TEMPERATURE
SENSOR (OPTIONAL)
SEE NOTE 3
REMOTE TEMPERATURE/
HUMIDITY SENSOR
(OPTIONAL)
CONTROL
THERMOSTAT
SEE NOTE 3
24 VAC (OPTIONAL)
REMOTE CONDENSING UNIT
AH-SVX008C-EN
Advertisement
Table of Contents
