Advertisement
Available languages
Available languages
E
MERGENCY OPERATION
When the remote controller cannot be used...
Emergency operation can be activate d by pressing the emergency operation
switch (E.O. SW) on the indoor unit.
Each time the E.O. SW is pressed, the operation changes
in the following order:
Operation indicator lamp
Note:
Th e fi rst 30 minute s of operation is test run. Temperatur e cont rol does not work,
and fan speed is set to High.
A
UTO RESTART FUNCTION
If a power failure occurs or the main power is turned off during operation, "Auto
res tart function" automatically start s op eration in the same mode as the one set
with the remote controll er just before the shutoff of the main power. When timer is
set, timer setting is cancelled and the uni t starts operation whe npower is resumed.
If you do not want to use this function, please con sult the service repre-
sentative becaus e the setting of the unit needs to b e ch anged.
Emergency COOL
Stop
Set temperature : 24°C
Fa n speed : Medium
Horizont al vane : Auto
En-8
Advertisement
