Summary of Contents for Mitsubishi Electric Mr.Slim MSY-GR09VF
Page 1
SPLIT-TYPE AIR CONDITIONERS INDOOR UNIT MSY-GR09VF MSY-GR13VF MSY-GR15VF MSY-GR18VF MSY-GR24VF MSY-GR30VF For user OPERATING INSTRUCTIONS English • To use this unit correctly and safely, be sure to read these operating instructions before use.
Page 2
● OPERATING INSTRUCTIONS ● ONTENTS I SAFETY PRECAUTIONS I NAME OF EACH PART I PREPARATION BEFORE OPERATION I SELECTING OPERATION MODES I FAN SPEED AND AIRFLOW DIRECTION ADJUSTMENT I FAST COOLING OPERATION I SLEEP OPERATION I TIMER OPERATION (ON/OFF TIMER) I EMERGENCY OPERATION I AUTO RESTART FUNCTION I CLEANING...
AFETY PRECAUTIONS WARNING Replace all batteries of the remote controller with new ones of the same type. • Using an old battery together with a new one may cause When the air conditioner does not cool or heat, there is a overheating, leakage, or explosion.
Page 4
● OPERATING INSTRUCTIONS ● AME OF EACH PART Indoor unit Remote controller <GR09/13/15> Battery replacement indicator Page 4 Heat exchanger Signal transmitting section Distance of signal : Front panel Air inlet About 6 m* Beep(s) is (are) heard from the indoor unit Air fi...
REPARATION BEFORE OPERATION Note: Before operation: Insert the power supply plug into the power outlet and/or turn the breaker on. How to set remote controller exclusively for a particular indoor unit A maximum of 4 indoor units with wireless remote Installing the remote controller batteries controllers can be set.
● OPERATING INSTRUCTIONS ● ELECTING OPERATION MODES I FEEL mode The unit selects the operation mode according to the room temperature when I FEEL is selected. When the room temperature is higher than 25°C, COOL is selected (set temperature: 24°C). When the room temperature is lower than 25°C, DRY is selected.
Page 7
Left-right Airflow direction AN SPEED AND AIRFLOW DI- RECTION ADJUSTMENT <GR09/13/15> Press to select airfl ow direction. Each press changes airfl ow direction in the following order: (SWING) <GR18/24/30> Press to select airfl ow direction. Each press changes airfl ow direction in the following order: (SWING) AST COOLING OPERATION Fan speed...
● OPERATING INSTRUCTIONS ● LEEP OPERATION IMER OPERATION (ON/OFF TIMER) Press during COOL mode page 5 to start SLEEP operation. • Set temperature will change over time. • Set temperature will be controlled slightly lower for about 2 hours. It will help you fall asleep more easily. •...
MERGENCY OPERATION When the remote controller cannot be used... Emergency operation can be activated by pressing the emergency operation switch (E.O. SW) on the indoor unit. Each time the E.O. SW is pressed, the operation changes in the following order: Operation indicator lamp Emergency COOL Stop...
Page 10
● OPERATING INSTRUCTIONS ● LEANING Instructions: • Switch off the power supply or turn off the breaker before cleaning. • Do not use water hotter than 50°C. • Be careful not to touch the metal parts with your hands. • Do not use a scrubbing brush, a hard sponge, or the like. •...
HEN YOU THINK THAT TROUBLE HAS OCCURRED Even if these items are checked, when the unit does not recover from the Symptom Explanation & Check points trouble, stop using the air conditioner and consult your dealer. Does not cool The room cannot be cooled •...
Page 12
● OPERATING INSTRUCTIONS ● RROR CODE DISPLAY MODE Error code can be checked on the display of remote Error code of remote controller controller while the upper operation indicator lamp on the indoor unit is blinking. Object Code Abnormal point None (Normal) Follow the procedure below to check the error code.
HEN THE AIR CONDITIONER IS NOT NSTALLATION PLACE AND GOING TO BE USED FOR A LONG TIME ELECTRICAL WORK Installation place Operate by COOL mode with the highest temperature Avoid installing the air conditioner in the following places. set or FAN mode for 3 to 4 hours. Page 5 •...