WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1
Slide the front I/O panel into the front I/O panel bay through the front of the computer.
2
Replace the two screws (M3x5) that secures the front I/O panel to the chassis.
3
Connect the USB 3.1 (Type-C) cable to the system board
4
Connect the USB 3.0 cable to the system board
5
Connect the USB 2.0 cable to the system board
6
Connect the front-audio cable to the system board
Replacing the front I/O-panel
computer. After working inside your computer, follow the instructions in
After working inside
www.dell.com/
Replacing the front I/O-panel
48
81