Replacing the front I/O-panel
ADVARSEL: Før du arbejder med computerens indvendige dele, skal du læse
de sikkerhedsinstruktioner, der fulgte med computeren, og følge trinene i
Før du arbejder med computerens indvendige
computerens indvendige dele, følg vejledningen i
på computerens indvendige
for sikkerhed, se hjemmesiden Regulatory Compliance på
regulatory_compliance.
Procedure
1
Place the I/O board in the slot on the chassis.
2
Align the screw holes on the I/O board with the screw holes on the chassis.
3
Replace the two screws (#6–32 UNC 1/4'') that secure the I/O board to the
chassis.
4
Connect the I/O-board cable to the I/O board.
Post-requisites
1
Replace the
front
2
Replace the
computer
68
dele. For flere oplysninger om bedste praksis
bezel.
cover.
dele. Efter du har arbejdet på
Efter du har udført arbejde
www.dell.com/