Replacing the front I/O-panel
AVVERTENZA: Prima di effettuare interventi sui componenti interni del
computer, leggere le informazioni sulla sicurezza fornite con il computer e
seguire la procedura in
computer. Dopo gli interventi sui componenti interni del computer, seguire
le istruzioni descritte in
computer. Per maggiori informazioni sulle procedure consigliate relative alla
sicurezza, consultare la home page Conformità alle normative su
www.dell.com/regulatory_compliance.
Procedure
1
Place the I/O board in the slot on the chassis.
2
Align the screw holes on the I/O board with the screw holes on the chassis.
3
Replace the two screws (#6–32 UNC 1/4'') that secure the I/O board to the
chassis.
4
Connect the I/O-board cable to the I/O board.
Post-requisites
1
Replace the
front
2
Replace the
computer
68
Prima degli interventi sui componenti interni del
Dopo gli interventi sui componenti interni del
bezel.
cover.