Sätta tillbaka 3,5-
tumshårddisken
VARNING: Innan du utför något arbete inuti datorn ska du läsa
säkerhetsinstruktionerna som medföljde datorn och följa stegen i
utför något arbete inuti
anvisningarna i
metoder för säkert handhavande finns på hemsidan för regelefterlevnad på
www.dell.com/regulatory_compliance.
Procedure
1
Place the hard drive in the hard-drive bracket.
2
Align the screw holes on the hard drive with the screw holes on the hard-drive
bracket.
3
Replace the four screws (#6–32 UNC 3.6 mm) that secure the hard-drive
bracket to the hard drive.
4
Slide the hard-drive assembly into the slot on the side-chassis until it snaps into
place.
5
Connect the data cable and the power cable to the hard drive.
6
Rotate the side-chassis towards the computer until it snaps into place.
7
Replace the screw (#6–32 UNC 1/4'') that secures the hard-drive assembly to
the side-chassis.
Post-requisites
1
Replace the
front
2
Replace the
computer
datorn. När du har arbetat inuti datorn följer du
När du har arbetat inuti
bezel.
cover.
datorn. Mer information om bästa
Innan du
33