About USB Communications
You can use these EDA51K accessories to transmit data to and receive data from
another device through serial or USB communications:
•
USB Troubleshooting
•
•
How to Share Your Mobile Data Connection
You can share the mobile data connection through USB tethering or Bluetooth
tethering. You can also use the computer as a Wi-Fi hotspot to share the
connection with other devices.
Use Bluetooth or USB Tethering to Share a Data
Connection
You can share your mobile computer data connection with another device through
a USB tethering or Bluetooth tethering connection.
Minimum requirements for USB Tethering
•
•
Set up and Connection
1. Connect the USB cable to both devices.
2. On the EDA51K, swipe down twice from the top of the screen.
3. Select Android System twice.
4. Change the USB Preference setting from to USB tethering.
5. Tap Settings
68
USB cable
If you have a problem with your workstation computer recognizing the USB
device, try downloading and installing the Honeywell-aidc-usb-driver. The
driver is part of the Honeywell_Mobility SDK_Android software.zip file. To learn
where to get the software, see
Check to make sure you have enabled the USB for file transfer. To learn more, see
Configure USB Connection and Transfer Files
The EDA51K must have an Android 10 OS or later.
A EDA51K compatible USB communication accessory.
> Network & Internet > Hotspot & tethering.
Developer Information
on page 18.
on page 70.
EDA51K User Guide