Honeywell ScanPal EDA57 Series Quick Start Manual
Honeywell ScanPal EDA57 Series Quick Start Manual

Honeywell ScanPal EDA57 Series Quick Start Manual

Hide thumbs Also See for ScanPal EDA57 Series:

Advertisement

Quick Links

ScanPal™ EDA57 Series
powered by Android™
Quick Start Guide
EDA57-A-EN-QS-01 Rev A
1/23

Advertisement

Table of Contents
loading

Summary of Contents for Honeywell ScanPal EDA57 Series

  • Page 1 ScanPal™ EDA57 Series powered by Android™ Quick Start Guide EDA57-A-EN-QS-01 Rev A 1/23...
  • Page 2: Memory Card Specifications

    Memory Card Specifications Honeywell recommends the use of Single Level Cell (SLC) industrial grade microSD™ or microSDHC™ memory cards with mobile computers for maximum performance and durability. Contact a Honeywell sales representative for additional...
  • Page 3: Computer Features

    Computer Features Imager Window Battery Status/ (LED/Laser Aperture) Notification LED Front Camera Power Button Scan Status LED Touch Panel Scan Button Microphone...
  • Page 4 Note: Hand strap not shown. Nano SIM and/ or MicroSD Card Slot...
  • Page 5 Laser Safety Speaker Label Location Camera Lens and Flash Volume Button Microphone Battery Cover Scan Button Latch Battery Cover Six-pin I/O Connector * USB port with Two-pin I/O Connector * * Six-pin connector or Two-pin with a USB port, depending on model.
  • Page 6 Install a Nano SIM Card(s) Note: Always power off the computer before attempting to install or remove a card.
  • Page 7 Install a microSD Card (Optional) Note: Format the microSD card before initial use. Note: Always power off the computer before attempting to install or remove a card.
  • Page 8: About The Battery

    Avant d’essayer d’utiliser, de charger ou de remplacer la batterie de l’appareil, lisez attentivement toutes les étiquettes, marquages et documentation du produit fournis dans la boîte ou en ligne à sps.honeywell.com. Pour en savoir plus sur l’Entretien de Batteries pour Appareils Portables, consultez-le honeywell.com/PSS-BatteryMaintenance.
  • Page 9: Install Battery

    Install Battery...
  • Page 10: Install The Hand Strap

    Install the Hand Strap...
  • Page 11 If the mobile computer is drawing more current than supplied by the charging source, charging will not take place. We recommend the use of Honeywell accessories and power adapters. Use of any non-Honeywell accessories or power adapters may cause damage not covered by the warranty.
  • Page 12: Turn Power On/Off

    About the USB Type C Connector On EDA57 models equipped with a USB port, you can use a USB cable to charge the mobile computer from a host device (e.g., laptop or desktop computer). The connected host device must supply a minimum power output of 5V, 0.5A to the EDA57 or the battery will not charge.
  • Page 13: Battery Replacement

    Battery Replacement Before removing the battery, always power off the computer. Improper battery replacement or incompatible device usage may result in risk of burns, fire, explosion, or other hazard. Dispose of batteries according to local regulations. Un remplacement inadéquat de la batterie ou une utilisation incompatible de l'appareil peut présenter des risques de brulures, d'incendie, d'explosion ou d'autres dangers.
  • Page 14: About The Home Screen

    About the Home Screen Notification / Status Bar Search Bar Home Screen Panel Favorites Tray Navigation Buttons...
  • Page 15: Navigation And Function Buttons

    Navigation and Function Buttons For button locations, see Computer Features on page 2. Button Description Back Return to the previous screen. Home Return to the Home screen. Recent Apps View and switch between recently used apps. Volume Press the top of the button to raise the speaker volume.
  • Page 16 About Provisioning Mode After completing the out-of-box set up process, Provisioning mode is automatically turned off. Scanning a barcode to install applications, certificates, configuration files, and licenses on the computer is restricted unless you enable Provisioning mode in the Settings app. To learn more, see the user guide. Scan a Barcode with the Scan Demo For optimum performance, avoid reflections by scanning the barcode at a slight angle.
  • Page 17 Sync Data To move files between your EDA57 and a computer: Connect the EDA57 to your computer using a USB charge/ communication accessory. On the EDA57, swipe down from the top of the screen to see the notifications panel. Touch the Android System notification twice to open the options menu.
  • Page 18 Note: To learn about advanced reset options, see the user guide. Support To search our knowledge base for a solution or log into the Technical Support Portal and report a problem, go to honeywell.com/PSStechnicalsupport. Documentation Product documentation is available at sps.honeywell.com.
  • Page 19: Limited Warranty

    Trademarks Android is a trademark of Google LLC. Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made.

This manual is also suitable for:

Scanpal eda57-1

Table of Contents