Table of Contents
Advertisement
L Series and C Series FIR-Drive Power
16
en | Installation
Amplifiers
Caution!
Blocking/closing the power amp's ventilation louvers is not permissible. Without sufficient
!
cooling/ventilation, the power amplifier may automatically enter protect mode.
Keep ventilation louvers free from dust to ensure unhindered airflow.
Notice!
Do not use the power amplifier near heat sources, like heater blowers, stoves, or any other
heat radiating devices.
Notice!
Do not use Dynacord power amplifiers in an environment where temperatures are below 0°C
or exceed +40°C.
For fixed amplifier installations in a device control room that incorporate a central air-cooling
system or air conditioners, calculating the maximum heat emission may be necessary.
See also
–
Mains operation & resulting temperature, page 35
2017.05 | 01 | F.01U.327.801
Installation manual
Bosch Sicherheitssysteme GmbH
Advertisement
Table of Contents
