Table of Contents
Advertisement
24
en | Power amplifier menu navigation
7
Power amplifier menu navigation
7.1
Amplifier and DSP control
An integrated amplifier and DSP control menu allows the user to select multiple system
settings on the power amplifier. When the power amplifier is powered on the home screens
appears.
Figure 7.1: LCD control and monitoring interface
Preset No: Preset Name
A: 0 dB (Default)
B: 0 dB (Default)
Table 7.1: Home screen
Preset No: Preset Name: If a recalled preset is edited the letter E is shown. Edited presets
can be stored in one of the 50 User Presets.
Channel A or B: Icons in the home screen lines 2 and 3 indicate that the original loaded preset
has been modified.
G = GEQ (Graphical Equalizer) in use
•
•
Accessing the amplifier DSP control menu
To access the amplifier DSP controls menu, do the following:
1.
2.
3.
4.
5.
6.
7.
8.
7.2
DSP control menu
In the DSP menu structure "U_" indicates user defined presets and "F_" indicates factory
settings. When firmware is updated the factory settings may change. Refer to the latest
release notes for further information.
2017.05 | 01 | F.01U.327.801
Range: Mute, -80 dB to 0 dB
Range: Mute, -80 dB to 0 dB
E = EQ/PEQ (Parametric Equalizer) in use
D = Delay in use
Push the encoder knob.
The DSP Control menu appears.
Turn the encoder knob to scroll through the menu items.
Push the encoder knob to select the menu item you want to modify.
The focus advances to the next parameter set.
Turn the encoder knob to scroll through the parameters.
Using the encoder knob, adjust the parameters to the desired value.
Push the encoder knob to confirm the modified parameter.
The parameter is changed to the current setting.
Repeat steps 2 through 6 to modify additional DSP and system settings.
Select EXIT to return to the home screen.
Installation manual
L Series and C Series FIR-Drive Power
Amplifiers
Bosch Sicherheitssysteme GmbH
Advertisement
Table of Contents
