Camera Operation; Operation By Clicking On The Video Display Area Or By Slider - Canon CR-N300 Settings Manual

Camera Operation

Set the camera angle by operating the camera's pan, tilt and zoom.
Note
Camera control by clicking and dragging does not guarantee exact precision.

Operation by Clicking on the Video Display Area or by Slider


Click Operation
When clicking on the video display area, the camera angle moves so that the position of the mouse pointer is at the
center.
If a single click does not center to the desired location, repeat the operation.
Note
When operating [Focus], the camera angle cannot be centered by clicking on the video display area.

Slider Operation
Dragging the pan and tilt slider knobs pans and tilts the camera.
Drag the zoom slider knob to operate the zoom.
The slider knob moves even if clicking the slider on the point without the knob.
Fine tune the pan, tilt, and zoom positions by clicking the
Zoom Slider
Move up to zoom in (telephoto) or down
to zoom out (wide angle).
Tilt Slider
Move the camera up or down.
Pan Slider
Move the camera left or right.
or , or , or T or W buttons.
25