Table of Contents
Advertisement
Important
When using IPv4 address settings in [Auto (DHCP)], in an environment with a router between the DHCP Server and the camera, IPv4
address may not be assigned correctly. In such a case, select [Manual] to set the fixed IPv4 address.
[IPv4 Address]
When [IPv4 Address Settings Method] is [Manual], enter the fixed IPv4 address.
[Subnet Mask]
When [IPv4 Address Settings Method] is [Manual], enter the subnet mask value specified for each network.
[IPv4 Default Gateway Address]
When [IPv4 Address Settings Method] is [Manual], enter a value. Make sure to set, when connecting the camera to a subnet
different from IP connection device such as controller.
[AutoIP]
Select whether to use AutoIP. When the AutoIP address is enabled, IP address automatically set will be displayed in [IPv4
Address (AutoIP)].
IPv6
Settings for connection to the camera using IPv6. IPv6 address can be acquired automatically from the RA or the DHCPv6
Server, or can be set manually.
Important
Regarding [IPv6 Address (Manual)], [Prefix Length] and [IPv6 Default Gateway Address] for manual setting of IPv6, contact your system
administrator.
[IPv6]
Select whether to use IPv6,
[Auto (RA)]
Select [Enable], when automatically setting the address using RA (Router Advertisement, network information transmitted
automatically from the router).
[Auto (DHCPv6)]
Select [Enable], when automatically setting the address using DHCPv6.
[IPv6 Address (Manual)]
For setting the address manually, enter a fixed IPv6 address.
[Prefix Length]
For setting the address manually, enter a prefix length.
[IPv6 Default Gateway Address]
For setting the address manually, enter a default gateway address. Make sure to set, when connecting the camera to a
subnet different from IP connection device such as controller.
[IPv6 Address (Auto)]
When [IPv6] is [Enable] and [Auto (RA)] or [Auto (DHCPv6)] is [Enable], the address automatically acquired will be
displayed.
DNS
Settings for the DNS Server address. DNS Server address can be set manually or can be acquired automatically from the
DHCP/DHCPv6 Server.
[Name Server Address 1], [Name Server Address 2]
Enter the name server address to be registered. When only one address is to be registered, leave [Name Server Address 2]
blank.
60
Hide quick links:
Advertisement
Table of Contents
