[System] > [Video And Audio] > [Hdmi/Sdi]; Hdmi/Sdi; Sdi - Canon CR-N300 Settings Manual

[System] > [Video and Audio] > [HDMI/SDI]
Settings for the output signal format of the HDMI and SDI terminals.

HDMI/SDI

Common settings for the video output signal format for HDMI/SDI.
[Video Output Configuration]
The video output format is set as a combination of the video size and frame rate.
The selectable HDMI/SDI video output format varies depending on the [Frame Frequency (Hz)] set in [System] > [System]
> [Environment].
[Frame Frequency (Hz)]
23.98
29.97
59.94
25.00
50.00
The settings and options for each video stream vary depending on the selected video output format. See [System] > [Video
and Audio] > [IP Streaming Video] for more information.
Note
SDI output is not available when the video size is 3840 x 2160.

SDI

Settings for the output signal method of the SDI terminals.
[3G-SDI Mapping]
Select the mapping method of the output signal of the SDI terminal. A signal conforming to Level A or Level B of the SMPTE
ST 425-1 standard is outputted.
HDMI/SDI video output format (video size/frame rate)
1920x1080/23.98P, 3840x2160/23.98P
1920x1080/29.97P, 3840x2160/29.97P
1280x720/59.94P, 1920x1080/59.94P, 1920x1080/59.94i
1920x1080/25.00P, 3840x2160/25.00P
1920x720/50.00P, 1920x1080/50.00P, 1920x1080/50.00i
51