[System] > [Server] > [Http/Video]; Http Server; Video Server - Canon CR-N300 Settings Manual

[System] > [Server] > [HTTP/Video]
Setting for the HTTP Server for distributing Settings Page and videos over the network, and video distribution via HTTP.

HTTP Server

Settings for the authentication method and HTTP port.
Important
A confirmation dialog will appear when the [HTTP port] or [HTTPS port] settings are changed, and the connection to the camera from the
active web browser may become disabled. If the changed settings are to be applied, click [OK].
If unable to reconnect to the camera from the web browser after restarting the camera, a message appears with a suggested URI, if any,
to reconnect to the camera.
If unable to connect to the camera through the displayed URI, contact your system administrator.
[Authentication Method]
Select the authentication method to be used by the HTTP Server.
[HTTP Port]
Enter the HTTP port.
In general, use [80] (factory default setting).
[HTTPS Port]
Enter the HTTPS port.
In general, use [443] (factory default setting).

Video Server

Settings for clients which can connect to the Video Server.
[Maximum Number of Clients]
Enter the maximum number of clients that can connect to the camera simultaneously.
If [0] is entered, only the administrator is allowed to connect.
Important
If there are many clients to distribute, the video frame rate may decrease or the audio may be cut off.
[Maximum Connection Time (sec.)]
Enter the maximum time, in seconds, that individual client can connect to the camera.
If [0] , the connection time is unlimited.
56