Canon CR-N300 Settings Manual page 81

[Network Settings and Management Information]
When set to [Save], initialization will be performed except for the following settings.
• Network Settings
• NTP Server
• HTTP Server
• Host Access Restrictions
• Time Zone
• Certificates
• SSL/TLS
• Administrator Name
• Administrator Password
When set to [Do not save], initialization will be performed all the settings excluding camera's date and time.
Since the network settings will be initialized, connection to the camera will not be enabled. Use the Camera Search Tool to
configure the initial settings.
Note
Even if the [Network Settings and Management Information] is set to [Save], the [Wireless LAN] setting will be initialized.
[Restore Default Settings]
After rebooting, follow the selection in [Network Settings and Management Information] to restore the default settings.
Note
• Before clicking [Execute] in [Restore Default Settings], it is recommended to back up the current settings.
• It is possible to restore the factory default settings by using the RESET switch, but be aware that all the settings except the camera date
and time will be restored to the factory default settings (P. 100).
81