Installation; Mounting The Dome Camera - Eneo IPP-72A0023MIA Quick Installation Manual

Installation

Mounting the Dome Camera

The dome camera is for use in surface or pendent mounting applications, and the
mounting member must be capable of supporting loads of up to 10 lb (4.5 kg). (Pendent
mounting must use pendent mount accessory.)
The dome cameras mounting bracket should be attached to a structural object, such as
hard wood, wall stud or ceiling rafter that supports the weight of the dome camera.
CAUTION 1: A silicone rubber sealant must be applied to seal the housing to secure
waterproofing.
CAUTION 2: Please reset the camera after 30 minutes when installing it in situations
colder than -10°C.
6
Plastic anchors (4x)
Mounting screws (4x)
Safety lanyard (1x)
Dome Camera (1x)