Cam; [A] Cam (A) - Actuator Motor Side; [B] Cam (B) - Rear Side - Hoshizaki IM-45WNE Service Manual

12. CAM

[a] CAM (A) - ACTUATOR MOTOR SIDE

Refer to "11. ACTUATOR MOTOR".

[b] CAM (B) - REAR SIDE

1) Remove the top panel and front panel.
2) Push the reset switch on the control box to open the water pan.
3) Unplug the icemaker or disconnect the power source.
4) Remove the extension spring from the cam (B).
5) Remove the split pin from the cam shaft.
6) Remove the cam (B).
7) Install the new cam in the reverse order of the removal procedure.
8) Replace the panels in their correct positions.
9) Plug in the icemaker or connect the power source.
81