Control Settings; Thermostat; Timer - Sawotec MN-23NS Manual

CoNTRoL SETTINgS

THERmoSTAT

Adjust the temperature of the sauna by simply turning the operating knob.
Thermostat support automatically the choosen temperature.
In case the heater overheats, the safety sensor will automatically stop the heater
even if the timer is on. Find out for what reason the heater overheated. The reason
for this could be too tightly placed sauna stones, heater´s location or inappropriate
ventilation. If this occurs, find out the cause and fix the problem before resetting
the safety sensor. The reset button is located below the temperature knob.

TImER

The timer has 1-6 (white) hours presetting time and 1-4 (pink) hours operating
time.
To start the heater at once, turn the knob to anywhere between 1-4 on the
operating time scale. The heater will start and remain on for the time selected.
To preset the timer, simply turn the knob to anywhere between 1-6. When the
specific number of hours is reached, the heater will start running and stay on for
up to 4 hours if you don´t turn it off earlier.
17
ENGLISH