Table of Contents
Advertisement
q
w
e
r
t
y
CUSTOMIZING EMBROIDERY MODE
SETTINGS
Embroidery Mode Settings
Press the embroidery setting mode tab (refer to page 48).
q Auto thread tension
The auto thread tension level can be adjusted with the
"+" or "–" key. Increase the value when using the same
threads on the bobbin and needle.
w Low bobbin thread warning
The low bobbin thread warning level can be adjusted with
the "+" or "–" key. To turn this option off, press the "–" key
until "OFF" shows in the window.
Press the next page key to go to the next menu.
e Maximum embroidery speed
The maximum embroidery sewing speed can be set from
400 to 860 spm in 100 spm intervals by pressing the "+"
or "–" key.
r One stitch stop
When this function is turned on, the machine sews one
stitch and stops automatically so that you can bring the
bobbin thread up before sewing.
t Consecutive color grouping
If an imported design files of a pattern combination
contain consecutive sections in the same color, these
sections are automatically grouped together as one
section when opening the file or going to the ready to sew
window. This function is invalid when combining the built-
in designs and externally sourced designs.
Turn this option off if you do not wish to group the
sections together.
y Hoop confirmation
The hoop confirmation message will appear every time
before opening the ready to sew window. However you
can turn this option off by selecting off.
51
Advertisement
Table of Contents
