Raising And Lowering The Presser Foot; Common Keys - Janome Memory Craft 500E Instruction Book

w
q
u

Raising and Lowering the Presser Foot

You can raise and lower the presser foot with the presser
foot lifter.
q Presser foot lifter
w Extra lifted position
You can raise the presser foot about 7 mm (1/4˝) higher
than the normal up position by exerting more pressure
when lifting the presser foot lifter.

Common Keys

q
q Home key
Press this key to enter the category selection.
w
w Open file key
Press this key and the open file window will open.
You can open embroidery designs saved in the machine's
internal memory or on a USB flash drive.
e
e Set mode key
Press this key to enter the setting mode. You can
customize the machine settings to your preference.
r
The machine settings for common settings, embroidery
and language selection are available in this mode.
r Help key
t
Press this key to view the step-by-step visual guide about
the essential operations.
t Lockout key
Press this key to lockout the machine when threading the
machine, replacing the accessories etc.
To reduce the risk of injury, all the buttons and keys are
y
deactivated.
To unlock the machine, press the lockout key t again.
y Next page key
To view the next page, press the next page key.
u Previous page key
To view the previous page, press the previous page key.
7
NOTE:
Do not turn the hand wheel when the presser foot is in
the extra lifted position.
CAUTION:
Do not press the visual touch screen with hard or
sharp objects like pencils, screwdrivers or the like.
Use the touch panel stylus included in the standard
accessories.