Common Setting Mode - Janome Memory Craft 500E Instruction Book

q
w
e
r

Common Setting Mode

q Screen Contrast
You can adjust the contrast of the visual touch screen by
pressing the "+" or "–" key.
w Sound Volume
The signal sound can be adjusted by pressing the "+" or "–"
key.
Set the value to "OFF" by pressing the "–" key several
times to mute the signal sounds.
e Inch/mm Option
You can set your machine's dimensional unit to either
inches or millimeters by pressing the "inch" or "mm" icon
key.
The default unit is millimeters.
Press the next page key to show the next menu.
r Touch Screen Calibration
You can calibrate the key positions of the touch screen if
you feel the touch screen key is not responding properly.
Press the Yes key to open the calibration window.
Press the "+" sign with the touch panel stylus as the sign
appears.
When you press the last sign, the screen shows "END"
and the calibration window will close.
49