Related Manuals for Kirisun PT6500-02
Summary of Contents for Kirisun PT6500-02
-
Page 1: Table Of Contents
PT6500-02 User’s Manual PT6500-02 User’s Manual CONTENTS Unpacking and checking ■ ◆ Supplied accessories ■ Preparation Charging the battery ◆ ◆ Installing/Removing the battery pack Installing the antenna ◆ Installing the optional speaker/microphone ◆ ◆ Installing the belt clip ■ Getting acquainted ■... -
Page 2: Unpacking And Checking
PT6500-02 User’s Manual █ Unpacking and checking Unpack the transceiver carefully. We recommend that you identify the items listed in the following table before discarding the packing material. If any items are missing or have been damaged during shipment, please contact the dealer immediately. - Page 3 PT6500-02 User’s Manual When battery is fully charged the indicator turns green. The performance will be at the best condition if you remove the battery when the green indicator is on. Then remove the power adaptor from the wall outlet.
-
Page 4: Installing/Removing The Battery Pack
PT6500-02 User’s Manual ◆Installing/Removing the battery pack To install the battery pack: Match the 3 bulges of the battery pack with the corresponding holes at the rear Button of the transceiver. To install the battery pack: Then firmly press the battery pack downwards to lock it in place until a click is heard. -
Page 5: Installing The Antenna
PT6500-02 User’s Manual ◆Installing the antenna Screw the antenna into the connector at the top of the transceiver by holding the Button of the antenna and turn it clockwise until secure. Installing the optional speaker/microphone ◆ Insert the speaker/microphone plug into the jacks of the versatile connector, and fix it with the supplied snail screw. -
Page 6: Getting Acquainted
PT6500-02 User’s Manual Getting acquainted The functions of the components are as follows: A. LED Indicator Lights red while transmitting; Lights green while receiving a signal. B. Power/Volume Switch Turn clockwise till a click is heard to switch on the radio. -
Page 7: Basic Operation
PT6500-02 User’s Manual normal voice. H. Side button 2 (programmable button) I. Button Return and delete button in the menu. Button Select Button. Button Select Button. Button Enter and Confirm Button. Numeric keypad Microphone/speaker jacks For connecting microphone/speaker. Explanation for the screen Basic Operation 1. - Page 8 PT6500-02 User’s Manual 2. Adjust Volume Press the button preset as canceling squelch to listen to the background noise and rotate the Power/Volume switch to adjust volume. Select a Channel Rotate the channel selector to select channels. You will hear voice from the speaker while receiving proper signals.
- Page 9 PT6500-02 User’s Manual Open/close Open/close Open/close High, middle, Level 0-9 Open/close 4. Make a Call To make a call, press PTT, and speak in normal voice and please keep your mouth 3~4 cm away from the microphone. Select squelch mode Receive a Call Release the PTT button to receive a call.
- Page 10 PT6500-02 User’s Manual If can not enter that way, you have to set in PC communications; Set back light: 1. As shown: in CH 1 , press , utilities is shown. 2. Press to enter select mode, 3. Press , and Back Light is shown, 4.
- Page 11 PT6500-02 User’s Manual 3. Press , and Save is shown, 4. Press to select Save 1：4, 5. Chang the save percentage with , press to confirm. Set scrambler： 1．As shown: in CH 1 , press , utilities is shown. 2. Press to enter select mode, 3.
-
Page 12: Programmable Button Functions
PT6500-02 User’s Manual 1．As shown: in CH 1 , press to enter select mode, 2. Press , and Call is shown, 3. Press to select the call list, 4. Select with , press PTT to transmit. ■ Programmable Button functions The dealer can program the 2 Side Buttons and 1 top Button with one of the following auxiliary functions. - Page 13 PT6500-02 User’s Manual Notes: programmable key can be set as short key or long key. The following functions can be programmed by the dealer: ● None Set of None。 Scan ● Press the button set as Scan to start scanning. While in scanning, the radio checks every channel (any channel in any zone) and stops on the channel on which a signal is detected until that signal disappears.
- Page 14 PT6500-02 User’s Manual Press again to enter the content interface of the contact list, e.g.: Dtmf Call Select the options in the contact list with Press PTT to transmit Press to quit. ●Busy Channel Lockout (BCL) Busy Channel Lockout can prevent you from interfering other radios that using the same channel.
- Page 15 PT6500-02 User’s Manual Select squelch level with , e.g.: Level Level Level 3. Press to confirm. ●Companding Enter the Companding mode when press the key programmed as “Companding”, It can be set as: short key: Companding, long key：off. ▲ 1. Press the programmable key once to open the Companding mode,...
- Page 16 PT6500-02 User’s Manual 1. Press the programmable key once: the battery power will be shown, 2. Press again: close the display. ● Monitoring Press the programmed as “monitor trigger” to shut up the CTCSS、 DCS、 2Tone and DTMF signal, and you can listen to the signals can not be heard in normal operation, press the key again to return to normal operation.
- Page 17 PT6500-02 User’s Manual ●Rptr/Talkarnd When press the key programmed as “Rptr/Talkarnd”, the next transmission will be at the same frequency as at which it is received. ▲It can be set as: short key: Rptr/Talkarnd, long key：off. 1. Press the key once,...
-
Page 18: Vox
PT6500-02 User’s Manual 3. Press to confirm. ●Manual programming The dealer can open the manual programming rights of: Channel frequency set, CTCSS，DCS. Basic operations of programmable keys: You can set the programmable keys with the “key set” in PC software, as follows: ▲It can be set as: short key: display channel... -
Page 19: Time-Out Timer（Tot
PT6500-02 User’s Manual VOX gain level to proper sensitivity. ■ Auxiliary Functions (programmed with PC) Time-out Timer (TOT) ◆ TOT timer: Time-out timer can prevent any caller from occupying one certain channel for an extended period of the time. The radio is set with a continuously transmitting limit. If the radio is continuously transmitting longer than... -
Page 20: User's Resolution
PT6500-02 User’s Manual from other irrelevant parties who are using the same channel. When you receive a signal that has a tone different from the one set on your radio, you will not hear the signal. Likewise, signals that you transmit will only be received by parties whose CTCSS/DCS tones are the same as yours. -
Page 21: 2Tone Signaling
PT6500-02 User’s Manual ◆2TONE signaling The dealer can set this function by programming. There are 4 systems of which the parameters can be set, e.g.: the duration of the first and the second tone, the duration of the long tone and audio spacing, etc. Select the audio frequency（3106.0～... -
Page 22: Major Specifications
PT6500-02 User’s Manual B．The CTCSS/DCS signaling of both users are not the same, set it with PC. C．Beyond the efficient communication range. No signal A．Make sure the antenna is well connected. B．Low sensibility, trimming “computer test mode”。 C．HF amplifier may be broken, replace it. -
Page 23: Status Setting
PT6500-02 User’s Manual Microphone 2.2kΩ Impedance Battery (Standard) Model：KB-36C，li-ion battery DC 7.4V , 1750mAh Model time of use：8 hours （5：5：90 period） Dimensions 56X120X35mm Weight 413（with battery and antenna） ■ Status setting (by the dealer) Model：___________ Serial No.： _____________ Channel setting：... - Page 24 PT6500-02 User’s Manual Top button Side button1 None None □ □ □ □ Voice reporting selector Voice reporting selector □ □ □ □ Rptr/Talkarnd Rptr/Talkarnd □ □ Call1/2/3/4 Call1/2/3/4 □ □ Separate working Separate working □ □ Emergency alert □...
- Page 25 PT6500-02 User’s Manual Scrambler □ Battery volume □ Warning: Compliance with RF Energy Exposure Standards Your two-way radio is designed and tested to comply with a number of national and international standards and guidelines (listed below) regarding human exposure to radio frequency electromagnetic energy.
- Page 26 PT6500-02 User’s Manual Body-worn operation • Always place the radio in an approved clip, holder, holster, case, or body harness for this product. Use of non- approved accessories may exceed FCC RF exposure guidelines. • If you do not use a approved body-worn accessory and are not using the radio in the intended use position in front of the face, then ensure the antenna and the radio are kept 2.5 cm (one inch) from...