Table of Contents
Advertisement
PICTURE: Controls the video adjustment of the projector.
BRIGHTNESS ▲ .... Increases the brightness adjustment value.
BRIGHTNESS ▼ .... Decreases the brightness adjustment value.
CONTRAST ▲ ........ Increases the contrast adjustment value.
CONTRAST ▼ ........ Decreases the contrast adjustment value.
COLOR ▲ .............. Increases the color adjustment value.
COLOR ▼ .............. Decreases the color adjustment value.
HUE ▲ ................... Increases the hue adjustment value.
HUE ▼ ................... Decreases the hue adjustment value.
SHARPNESS ▲ ..... Increases the sharpness adjustment value.
SHARPNESS ▼ ..... Decreases the sharpness adjustment value.
• The functions that can be controlled will vary depending on the signal being input to the projector. (→ page 82,
83)
SOURCE SELECT: This switches the input terminal of the projector.
HDMI ..................... Switches to the HDMI IN terminal.
DisplayPort ............ Switches to the DisplayPort IN.
BNC ....................... Switch to BNC video input.
BNC(CV) ................ Switch to BNC (CV) video input.
BNC(Y/C) ............... Switch to BNC (Y/C) video input.
COMPUTER ........... Switches to the COMPUTER IN terminal.
HDBaseT ................ Switch to image input sent from a transmission device that supports HDBaseT.
SLOT ...................... The projector switches to video input from the optional board when an optional board (sold separately) is
equipped on.
PROJECTOR STATUS: This displays the condition of the projector.
LIGHT HOURS USED ..........Displays how many hours the light module has been used.
FILTER HOURS USED .........The number of filter hours used is displayed.
ERROR STATUS ..................Displays the status of errors occurring within the projector.
LOG OFF: Logging off your projector and returning to the authentication screen (LOGON screen).
45
3. Convenient Features
Advertisement
Table of Contents
