Note On Startup Screen (Menu Language Select Screen) - NEC PH1202HL1 User Manual

Note on Startup screen (Menu Language Select screen)

When you first turn on the projector, you will get the Startup menu. This menu gives you the opportunity to select one
of the 29 menu languages.
To select a menu language, follow these steps:
1. Use the ▲, ▼, ◀ or ▶ button to select one of the 29
languages from the menu.
2. Press the ENTER button to execute the selection.
After this has been done, you can proceed to the menu
operation.
If you want, you can select the menu language later.
(→ [LANGUAGE] on page
NOTE:
• When the KEY LOCK indicator is flashing, that means [CONTROL PANEL LOCK] has been set and pressing the
cause the unit to power-on. Release [CONTROL PANEL LOCK]. (→ page
• While the POWER indicator is blinking blue in short cycles, the power cannot be turned off by using the power button. (While the
POWER indicator is blinking blue in long cycles, the OFF TIMER is functioned and the power can be turned off.)
72 and 101)
2. Projecting an Image (Basic Operation)
28
)
17
button will not