Notes:
VCA Resource function varies according to different camera models.
•
Face Detection and Heat Map are mutually exclusive. When SMART Event +
•
Heat Map is enabled, Face Detection interface will not be displayed.
The function may not be supported by some camera models.
•
Open Source Software License
Information about the open source software that applies to the IP camera can be
checked if required. Go to Configuration > System Settings > About.
Maintenance
Upgrade & Maintenance
Purpose:
The upgrade & maintenance interface allows you to process the operations, including
reboot, partly restore, restore to default, export/import the configuration files, and
upgrade the device.
Enter the Maintenance interface: Configuration > System > Maintenance >
Upgrade & Maintenance.
Reboot: Restart the device.
Restore: Reset all the parameters, except the IP parameters and user information,
to the default settings.
Default: Restore all the parameters to the factory default.
Notes:
After restoring the default settings, the IP address is also restored to the
•
default IP address, please be careful for this action.
For camera that supports Wi-Fi, wireless dial, or wlan function, Restore
•
action does not restore the related settings of mentioned functions to default.
Information Export
Network Camera User Manual
40