(Optional) Setting Security Question; Setting The Network Camera Over The Wan - HIKVISION DS-2XE6252F-IS User Manual

Network Camera User Manual
Modifying the Network Parameters
8. Change the device IP address to the same subnet with your computer by either
modifying the IP address manually or checking the checkbox of Enable DHCP.
9. Input the password to activate your IP address modification.

(Optional) Setting Security Question

Security question is used to reset the admin password when admin user forgets the
password.
Admin user can follow the pop-up window to complete security question settings
during camera activation. Or, admin user can go to User Management interface to set
up the function.

Setting the Network Camera over the WAN

Purpose:
This section explains how to connect the network camera to the WAN with a static IP
or a dynamic IP.
9