Configuring Rs232 Settings; Configuring Rs485 Settings - HIKVISION DS-2XE6252F-IS User Manual

Configuring RS232 Settings

The RS232 port can be used in two ways:
 Parameters Configuration: Connect a computer to the camera through the serial
port. Device parameters can be configured by using software such as
HyperTerminal. The serial port parameters must be the same as the serial port
parameters of the camera.
 Transparent Channel: Connect a serial device directly to the camera. The serial
device will be controlled remotely by the computer through the network.
Steps:
1. Enter RS232 Port Setting interface: Configuration> System > System Settings >
RS232.
2. Configure the Baud Rate, Data Bit, Stop Bit, Parity, Flow Control, and Usage.
Note: If you want to connect the camera by the RS232 port, the parameters of the
RS232 should be exactly the same with the parameters you configured here.
3. Click Save to save the settings.

Configuring RS485 Settings

Purpose:
The RS485 serial port is used to control the PTZ of the camera. The configuring of
Network Camera User Manual
RS232 Settings
36