Troubleshooting Table; Problems With Operation - Hanseatic HG4585D107636QW User Manual

Troubleshooting table

Malfunctions can occur in all electrical appliances. This does not necessarily mean there is a
defect in the appliance. For this reason, please check the tables to see if you can correct the
malfunction.
WARNING!
Risk of electric shock in case of improp-
er repair!
Conducting improper repairs to the
dishwasher puts the person carrying
out the repairs and the user in danger.
Only authorised specialists may
■
repair the dishwasher. If in doubt,
contact our service department
(see page EN-39).
Only carry out the actions which are
■
described in this user manual.
Never repair defective dishwashers
■
– or dishwashers which you presume
to be defective – yourself. You can en-
danger yourself and subsequent users.

Problems with operation

Problem
Signal tones must
sound
The display will switch
off.
The appliance
door will open
automatically.
The dishwasher
cannot be switched
on.
Risk of damage!
Improper handling of the dishwasher
can lead to property damage and to
damage to the dishwasher.
■
■
Possible cause
This is not an appliance fault. See „Signal tones" on page EN-23.
This is not an appliance fault. See „Display" on page EN-23.
This is not an appliance fault. The door opens automatically at
the end of a programme run to allow the hot steam to escape.
The mains plug has not been
inserted into a socket.
There is no voltage being
supplied through the socket.
Troubleshooting table
NOTICE
If water overfl ows, switch off the wa-
ter supply immediately and then con-
tact the service team (see page E N-39).
If the water has overfl owed, remove
any water standing in the dishwasher
before restarting a wash programme.
Solution
Connect the mains plug to a
properly installed socket.
Check the fuse. Check the
socket by connecting another
device.
Page EN-35